ligitek electronics co.,ltd. property of ligitek only lvy3333/s46 data sheet super bright round type led lamps doc. no : qw0905- rev. : date : a - 2005 18 - oct lvy3333/s46
ligitek electronics co.,ltd. property of ligitek only package dimensions directivity radiation note : 1.all dimension are in millimeter tolerance is ? 0.25mm unless otherwise noted. 2.specifications are subject to change without notice. 25.0min 2.54typ 1.0min ?? 0.5 typ lvy3333/s46 part no. 1.5max 7.6 8.6 5.0 5.9 page 1/4 30 x 0 x 60 x 50% 75% 25% 0 25% 100% -30 x -60 x 50% 75% 100%
page ligitek electronics co.,ltd. property of ligitek only unit vy ratings ma ma 30 60 g a j 10 -40 ~ +85 max 260 j for 5 sec max (2mm from body) j -40 ~ +100 75 mw typ. min. max. luminous intensity @20ma(mcd) min. spectral halfwidth ??f nm dominant wave length f dnm forward voltage @ ma(v) 30 1500 900 20 590 viewing angle 2 c 1/2 (deg) part no. lvy3333/s46 symbol parameter i f i fp forward current peak forward current duty 1/10@10khz ir t opr operating temperature reverse current @5v tsol soldering temperature storage temperature tstg power dissipation pd color lens emitted part no material typical electrical & optical characteristics (ta=25 j ) absolute maximum ratings at ta=25 j note : 1.the forward voltage data did not including ? 0.1v testing tolerance. 2. the luminous intensity data did not including ? 15% testing tolerance. 2/4 lvy3333/s46 algainp water clear yellow 1.7 2.6 20 electrostatic discharge esd 2000 v
fig.3 forward voltage vs. temperature fig.5 relative intensity vs. wavelength ambient temperature( j ) relative intensity@20ma wavelength (nm) forward voltage@20ma normalize @25 j fig.4 relative intensity vs. temperature ambient temperature( j ) relative intensity@20ma normalize @25 j forward voltage(v) fig.1 forward current vs. forward voltage forward current(ma) forward current(ma) fig.2 relative intensity vs. forward current relative intensity normalize @20ma ligitek electronics co.,ltd. property of ligitek only 1.0 0.1 1.0 10 100 1000 1.0 10 100 1000 0.0 0.5 1.0 1.5 2.0 2.5 3.0 -40 -20 0 20 40 60 1.0 1.1 1.2 500 550 600 0.0 0.5 1.0 1.5 2.0 2.5 3.0 80 100 0.8 0.9 -20 -40 40 20 080100 60 2.0 0.0 0.5 1.0 1.5 2.5 3.0 650 typical electro-optical characteristics curve vy chip page3/4 part no. lvy3333/s46
thermal shock test solderability test solder resistance test high temperature high humidity test mil-std-202: 107d mil-std-750: 1051 mil-std-883: 1011 mil-std-202: 208d mil-std-750: 2026 mil-std-883: 2003 jis c 7021: a-2 mil-std-202: 210a mil-std-750: 2031 jis c 7021: a-1 mil-std-202:103b jis c 7021: b-11 the purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. this test intended to see soldering well performed or not. this test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. the purpose of this test is the resistance of the device under tropical for hous. 1.t.sol=260 j? 5 j 2.dwell time= 10 ? 1sec. 1.t.sol=230 j? 5 j 2.dwell time=5 ? 1sec 1.ta=105 j? 5 j &-40 j? 5 j (10min) (10min) 2.total 10 cycles 1.ta=65 j? 5 j 2.rh=90 %~95% 3.t=240hrs ? 2hrs part no. lvy3333/s46 reliability test: high temperature storage test low temperature storage test operating life test test item page mil-std-750: 1026 mil-std-883: 1005 jis c 7021: b-1 jis c 7021: b-12 mil-std-883:1008 jis c 7021: b-10 reference standard ligitek electronics co.,ltd. property of ligitek only the purpose of this is the resistance of the device which is laid under ondition of high temperature for hours. the purpose of this is the resistance of the device which is laid under condition of low temperature for hours. this test is conducted for the purpose of detemining the resisance of a part in electrical and themal stressed. 1.under room temperature 2.if=20ma 3.t=1000 hrs (-24hrs, + 72hrs) 1.ta=105 j? 5 j 2.t=1000 hrs (-24hrs, + 72hrs) 1.ta=-40 j? 5 j 2.t=1000 hrs (-24hrs, + 72hrs) test condition description 4/4
|
